Automatic Rotational Press Mod. OM600-300T

The first is used for the dosing and the vibration of the mortar with the Automatic Batcher-Distributor Mod. KM200, which distributes in a perfect and constant manner the mixing inside the moulds of the press.
Equipped with slide plates in special anti-wear steel and independent hydraulic unit that controls the movement of the dosing buckets;

The second and third stations are used for the vibration for better compacting the mortar;

The fourth station used for the distribution and shaving of the second layer with the Automatic Batching System Mod. DC200, that distributes the mixing into the moulds of the press using a drawer moved by mechanical link; equipped with gear motor with oil lubricated gears, pneumatic vibrating unit to facilitate unloading, a screed rubber, air actuated and with adjustable pressure, for a perfect cleaning of the mould;

The fifth station used for a two-stage pressing procedure: during the first phase the inert materials are quickly approached to be compacted inside the mould; the second stage is slower and employs a higher pressure up to a maximum power of 315.000 Kg;

The sixth station used for demolding tiles with an automatic extractor moved by mechanical link and with approaching turret with pneumatic system.

Interchangeable Frames with pneumatic closing of the moulds on the rubber bottom plates with adjustable force; equipped with a station for cleaning and maintenance;

The rotation and correct positioning of the table is performed using a Worm Screw controlled by a gear motor with oil lubricated gears;

Vibration of the vibrating plan on special anti-vibrating iron-rubber with moto-vibrator with adjustable eccentric masses, with a power of 950W (1.200 Kg of centrifugal force);

Production possible up to size 50x50x1 with maximum thickness of mould up to 60mm;

Electric Control Panel with programmable PLC logic; synoptic panel for automatic and manual controls, display of current operations and troubleshooting via luminous indicators and Touch-Screen for the management and supervision of machine.

Prepared, on request, for use with our remote control system for remote assistance and cloud sharing of machine data for interfacing with SCADA, ERP systems, etc. via wired local LAN or WiFi.